Material Name: Atactic Polypropylene (APP) Roof Sheets Material Safety Data Sheet ID: 3133 Section 1 - Chemical Product and Company Identification
Product Name Atactic Polypropylene Sheets CAS# Mixture (Article) Generic Name Asphalt Coated Polyester Mat & Fiber Glass Mat Formula Hydrocarbon Mixture (Article) Chemical Name: Mixture (Article) Hazard Label RR01 Roll Roofing Manufacturer Information Johns Manville
Telephone: 303-978-2000 8:00AM-5:00PM M-F
Emergency: 800-424-9300 (Chemtrec, In English)
Trade Names:
APPeX™ 180, 4M, 4S, 4.5M, 4.5M FR, 5S;
Section 2 - Composition / Information on Ingredients Component
Additional Component Information
* Ingredient found only in products with S suffix in trade name (e.g, APPeX™ 5S). Respirable crystalline silica from sand is not expected to be released; sand is adhered to product and is >99.9% too large to become airborne or to be respirable. A surface treatment of sand is used as a parting agent; sand may be replaced with either talc (asbestos-free) or other natural, non-hazardous mineral powder. ** Ingredient found only in products with M suffix in trade name (e.g., APPeX™ 4M). Ceramic-coated granite, contains 35% crystalline silica. Airborne crystalline silica not expected to be released; is encapsulated in relatively large (non-respirable) particles that are adhered to product surface. *** Products with FR suffix in trade name also contain Colemanite, a naturally-occurring mineral, for fire resistance.
Section 3 - Hazards Identification Emergency Overview
APPEARANCE AND ODOR: Dark mat with a sand or granular surface. Asphalt odor. When heated or cut, this product may release dust or fumes. If dust or fumes are inhaled to excess (e.g., in a confined space), they may irritate the upper respiratory tract.
Potential Health Effects
____________________________________________________________
Material Name: Atactic Polypropylene (APP) Roof Sheets Material Safety Data Sheet ID: 3133
Due to the large size of the particles, minimal exposure to airborne dust is expected. Primarily a nuisance dust. Asphalt and its fumes can irritate skin, eyes, and upper respiratory tract. See Section 11 for more details.
Inhalation
Irritation of the upper respiratory tract (scratchy throat), coughing, and congestion may occur in extreme exposures.
Temporary irritation (itching) or redness may occur.
Ingestion
This product is not intended to be ingested (eaten). If ingested, it may cause temporary irritation to the gastrointestinal (digestive) tract.
Temporary irritation (itching) or redness may occur.
Primary Routes of Entry (Exposure) Target Organs
Upper respiratory passages, skin, and eyes.
Medical Conditions Aggravated by Exposure
As with any dust, pre-existing upper respiratory and lung diseases or conditions may be aggravated.
Section 4 - First Aid Measures First Aid: Inhalation
Remove to fresh air. Drink water to clear throat, and blow nose to remove dust.
First Aid: Skin
Wash gently with soap and warm water to remove dust and fibers. Wash hands before eating or using the restroom.
First Aid: Ingestion
Rinse mouth with water to remove fibers, and drink plenty of water to help reduce the irritation. No chronic effects are expected following ingestion.
First Aid: Eyes
Do not rub or scratch your eyes. Dust particles may cause the eye to be scratched. Flush eyes with large amounts of water for 5-15 minutes. If irritation persists, contact a medical professional.
First Aid: Notes to Physician
Substances released from this product during cutting or heating may be irritating, but are not expected to produce any lasting health effects from acute exposures. Treatment should be directed toward removing the source of irritation with symptomatic treatment as necessary.
Section 5 - Fire Fighting Measures
Flash Point: Not applicable Method Used: Not applicable Upper Flammable Limit (UFL): Not applicable Lower Flammable Limit (LFL): Not applicable Auto Ignition: Not determined Flammability Classification: Not determined Rate of Burning: Not determined General Fire Hazards
Burning of this material will produce thick black smoke
Extinguishing Media
Foam, carbon dioxide (CO2), dry chemical ABC rated.
Fire Fighting Equipment/Instructions
No special procedures are expected to be necessary for this product. Normal fire fighting procedures should be followed to avoid inhalation of smoke and gases.
Section 6 - Accidental Release Measures Containment Procedures
Pick up large pieces. Vacuum dusts. If sweeping is necessary, use a dust suppressant such as water. Do not dry sweep dust accumulation. These procedures will help to minimize potential exposures.
Clean-Up Procedures Section 7 - Handling and Storage Handling Procedures
Use protective equipment as described in Section 8 of this material safety data sheet when handling uncontained material.
____________________________________________________________
Material Name: Atactic Polypropylene (APP) Roof Sheets Material Safety Data Sheet ID: 3133 Storage Procedures
Warehouse storage should be in accordance with package directions, if any. Material should be kept dry, and protected from moisture.
Section 8 - Exposure Controls / Personal Protection Exposure Guidelines A: General Product Information
Due to product form, exposure to hazardous dusts or mists are not expected to occur. Exposure limits are given for reference only.
B: Component Exposure Limits Asphalt (8052-42-4)
ACGIH: 0.5 mg/m3 TWA (inhalable fraction, as benzene-soluble aerosol)
Crystalline silica (sand) (14808-60-7)
ACGIH: 0.05 mg/m3 TWA (respirable fraction)
Calcium carbonate (1317-65-3)
OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable fraction)
Continuous filament glass fibers (65997-17-3)
ACGIH: 1 fiber/cm3 TWA (respirable fibers: length > 5 µm, aspect ratio equal to or greater than 3:1, as
determined by the membrane filter method at 400-450X magnification (4-mm objective), using phase-contrast illumination.); 5 mg/m3 TWA (inhalable fraction) (related to Continuous filament glass fibers)
PERSONAL PROTECTIVE EQUIPMENT Personal Protective Equipment: Eyes/Face
Safety glasses with sideshields are recommended to keep dust out of the eyes.
Personal Protective Equipment: Skin Personal Protective Equipment: Respiratory
Not required unless used with asphalt or coal tar mastics. In those cases, follow the specific precautions for the material being used.
Ventilation
No special ventilation systems are required when using this product.
Personal Protective Equipment: General
Recommended during installation: Loose-fitting, long-sleeved shirt and long pants and a cap should be worn to protect skin from irritation from dust.
Section 9 - Physical & Chemical Properties Appearance: Dark mat with a sand surface Odor: asphalt Physical State: Solid pH: Not applicable Vapor Pressure: Not applicable Vapor Density: Not applicable Boiling Point: >370ºC/700ºF Melting Point: >95ºC/200ºF Solubility (H2O): Nil Specific Gravity: 1.2-1.6 Freezing Point: Not applicable Evaporation Rate: Not applicable Viscosity: Not applicable Percent Volatile: 0 VOC: Not applicable Section 10 - Chemical Stability & Reactivity Information Chemical Stability Chemical Stability: Conditions to Avoid
Avoid direct exposure to very high heat or flame.
____________________________________________________________
Material Name: Atactic Polypropylene (APP) Roof Sheets Material Safety Data Sheet ID: 3133 Incompatibility
Strong oxidizing agents, reducing agents, strong acids and alkalis.
Hazardous Decomposition
The decomposition products from this material are those that would be expected from any organic (carbon-containing) material. These decomposition products may include carbon dioxide, carbon monoxide, and carbon particles.
Hazardous Polymerization Section 11 - Toxicological Information Acute Toxicity A: General Product Information
Prolonged skin contact may cause slight irritation. Under normal conditions of use, dust is not expected to be generated. If power equipment is used to cut or saw the product, dust may be generated. Dust and fumes from this product are irritants and may cause transitory irritation to exposed areas such as eyes, skin, and upper respiratory passages.
B: Component Analysis - LD50/LC50 Asphalt (8052-42-4) Oral LD50 Rat: >5000 mg/kg; Dermal LD50 Rabbit: >2000 mg/kg Crystalline silica (sand) (14808-60-7) Oral LD50 Rat: 500 mg/kg Calcium borate (Colemanite) (12007-56-6) Oral LD50 Rat: 5600 mg/kg Polyethylene (9002-88-4) Inhalation LC50 Mouse: 12 g/m3/30M Carcinogenicity A: General Product Information
Note: Due to the product form, exposures to hazardous dusts or fumes are not expected to occur. Exposure limits are given for reference only.
B: Component Carcinogenicity Asphalt (8052-42-4)
ACGIH: A4 - Not Classifiable as a Human Carcinogen (as benzene soluble aerosol)
IARC: Group 3 - Not Classifiable (IARC Supplement 7, 1987; Monograph 35, 1985)
Crystalline silica (sand) (14808-60-7)
NTP: Known Carcinogen (related to Silica, crystalline (respirable size)) (Select Carcinogen)
IARC: Group 1 - Known Human Carcinogen (IARC Monograph 68, 1997, listed under Crystalline silica,
inhaled in the form of quartz or cristobalite from occupational sources)
Continuous filament glass fibers (65997-17-3)
ACGIH: A4 - Not Classifiable as a Human Carcinogen (related to Continuous filament glass fibers)
IARC: Group 3 - Not Classifiable (IARC Monograph 43, 1988; Monograph 81, 2002)
Polypropylene, atactic and isotactic (9003-07-0)
IARC: Group 3 - Not Classifiable (IARC Supplement 7, 1987; Monograph 19, 1979)
Polyethylene (9002-88-4)
IARC: Group 3 - Not Classifiable (IARC Supplement 7, 1987; Monograph 19, 1979)
____________________________________________________________
Material Name: Atactic Polypropylene (APP) Roof Sheets Material Safety Data Sheet ID: 3133 Chronic Toxicity
Respirable crystalline silica from sand is not expected to be released; sand is adhered to product and is >99.9% too large to become airborne or to be respirable. Crystalline silica is considered a hazard by inhalation. The International Agency for Research on Cancer (IARC) has classified crystalline silica as a Group 1 substance, carcinogenic to humans. This classification is based on the findings of laboratory animal studies (inhalation and implantation) and epidemiology studies that were considered sufficient for carcinogenicity. Several studies have been conducted to determine the risk of cancer to workers exposed to dusts which contain crystalline silica. However, these studies did not consider other factors or elements that workers may be exposed to. Therefore, the causes of the excess deaths due to cancer could not be precisely determined. Further studies are being conducted to determine the risk of cancer when working with crystalline silica products. Excessive exposure to crystalline silica can cause silicosis, a non-cancerous lung disease. Asphalt (asphalt CAS # 8052-42-4 and oxidized asphalt 64742-93-4; bitumens): In 1985/87, IARC (International Agency for Research on Cancer) concluded the following: (a) Bitumens are not classifiable as to their carcinogenicity to humans (Group 3). (b) Extracts of steam- and air-refined bitumens are possibly carcinogenic to humans (Group 2B). IARC found that evidence for carcinogenicity from animal studies was: inadequate for undiluted air-refined bitumens; limited for steam-refined and cracking-residue bitumens; sufficient for extracts of steam-refined and air-refined bitumen. IARC found that human evidence for carcinogenicity of asphalt fumes was inadequate. Studies of roofers indicated an excess of cancers; however, IARC concluded that, since roofers may be exposed also to coal-tar pitches and other materials, "the excess cancer risk cannot be attributed specifically to bitumens." In 1994, a published review of 20 epidemiology studies of asphalt workers and roofers agreed with IARC, that current human evidence is inadequate for the carcinogenicity of asphalt fumes in humans. Trace amounts of polynuclear aromatic hydrocarbons (PAHs) may be present in some asphalts and can be released upon excessive heating, which results in thermal cracking of the asphalt compounds. Some of these PAHs have been identified as having the potential to induce carcinogenic and reproductive health effects. Continuous Filament Glass Fiber: No chronic health effects are known to be associated with exposure to continuous filament fiber glass. Long-term epidemiologic studies do not show any increases in respiratory cancer or other disease among employees who manufacture this product. In 1987, the International Agency for Research on Cancer (IARC) classified continuous filament fiber glass as a Group 3 substance, "not classifiable as to its carcinogenicity to humans." In 2001, IARC re-affirmed this designation. Because of the large diameter of continuous filament fibers, these fibers are not considered respirable.
Section 12 - Ecological Information Ecotoxicity A: General Product Information B: Component Analysis - Ecotoxicity - Aquatic Toxicity
No ecotoxicity data are available for this product's components.
Section 13 - Disposal Considerations US EPA Waste Number & Descriptions A: General Product Information
Wastes are not hazardous as defined by the Resource Conservation and Recovery Act (RCRA; 40 CFR 261). Comply with state and local regulations for disposal of solid wastes. If you are unsure of the regulations, contact your local Public Health Department, or the local offices of the Environmental Protection Agency (EPA).
B: Component Waste Numbers
No EPA Waste Numbers are applicable for this product's components.
Disposal Instructions
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
Section 14 - Transportation Information Shipping Name: This product is not classified as hazardous for transportation. Section 15 - Regulatory Information US Federal Regulations A: General Product Information
SARA 311/312: This product is not classified as hazardous under SARA 311/312.
____________________________________________________________
Material Name: Atactic Polypropylene (APP) Roof Sheets Material Safety Data Sheet ID: 3133 B: Component Analysis
None of this products components are listed under SARA Section 302 (40 CFR 355 Appendix A), SARA Section 313 (40 CFR 372.65), or CERCLA (40 CFR 302.4).
State Regulations A: General Product Information
Asphalt fumes may contain trace amounts of the following California Proposition 65 Listed Substances as known to the state of California to cause cancer or reproductive effects: Poly nuclear aromatic hydrocarbons (benz(a)anthracene, benzo(b)fluoranthene, benzo(j)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene).
B: Component Analysis - State The following components appear on one or more of the following state hazardous substances lists: Component
The following statement(s) are provided under the California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): WARNING! This product contains a chemical known to the state of California to cause cancer.
Crystalline silica (sand) CAS# 14808-60-7
A: TSCA Status
This product and its components are listed on the TSCA 8(b) inventory. None of the components listed in this product are listed on the TSCA Export Notification 12(b) list.
B: Component Analysis - Inventory Component
Component Analysis - WHMIS IDL
The following components are identified under the Canadian Hazardous Products Act Ingredient Disclosure List:
Component Minimum Concentration Section 16 - Other Information Other Information
Prepared for: Johns Manville Roofing Systems Group P. O. Box 5108 Denver, CO USA 80217-5108 Prepared by: Johns Manville Technical Center P.O. Box 625005 Littleton, CO USA 80162-5005 The information herein is presented in good faith and believed to be accurate as of the effective date given. However, no warranty, expressed or implied, is given. It is the buyer's responsibility to ensure that its activities comply with Federal, State or provincial, and local laws.
____________________________________________________________
Material Name: Atactic Polypropylene (APP) Roof Sheets Material Safety Data Sheet ID: 3133
Update crystalline silica Sect. 8 (ACGIH exposure guideline) and Sect. 11 (ACGIH suspected carcinogen). Update asphalt ACGIH TWA.
Sect. 2: Products designated as Articles per TSCA and CEPA. Sect. 11: revise IARC Group 3 for asphalt. Update trade names.
Sect. 1, Deleted obsolete product name, Roof Defender APP Cap Sheet.
Section 1: Bicor S FR changed to Bicor S
Regulatory update. Minor edits in Section 8 Exposure and Section
____________________________________________________________
ITF CRD Register (April 2007) CURRENT OPEN CRD WORKSTACK DATE RAISED HIGH LEVEL DESCRIPTION ORIGINATOR CURRENT PRIORITY INDUSTRY NOTES 02/12/97 Delete part & whole of group OSIS on-line user will have the ability to allow either the whole or part of the group to be selected for deletion, and ceased by a single transaction. 02/12/97 National DQ group insert/update/cease
The SOAP Note and Presentation Use the SOAP Format for all Oral Presentations and Notes z Sometimes the term “SOAP” note is only applied to short notes but the format is used throughout medical practice for communication. SOAP Notes z Includes information you have learned from the patient or people caring for the patient. SOAP Notes z This section includes observations and
Material Name: Atactic Polypropylene (APP) Roof Sheets