Silicolor ¥ home2 ¥ gb (page 1)

SILICOLOR
HIGHLY TRANSPIRING SILICON WATER PAINT FOR INTERIORS AND EXTERIORS
On damp-proof plaster in refurbished rooms or in any case in the presen-
ce of notable humidity in the walls it is necessary to use a transpiring fini-
sh which decorates and protects the restored surfaces. It is therefore ne-
cessary to pay particular attention to the choice of the paint to be used,
which must meet the requirements of the highest level of vapour permea-
bility (transpirability), high water repellence and resistance to aggressive
atmospheric agents.
DESCRIPTION
COVERAGE
SAFETY REGULATIONS
0.250 kg/m2 per two coats. Approxi-mate yield: 4 m2/litre, on plastered FIELDS OF USE
• Keep out of the reach of children.
PRECAUTIONS
• Mix the product well before use.
• The paint is ruined by frost, once it METHOD OF USE
SUBSTRATE PREPARATION
APPLICATION
cavities in the plaster must be filledbefore painting. Any old synthetic resin based paints must be comple-tely removed.
4th DIVISION
SILICOLOR
TECHNICAL CHARACTERISTCS
Appearance
mat white
Emulsion binder
Specific weight (volumetric mass)
1.45 kg/litre
Dry residue
Resistance to washing
Transpirability
very high
Permeability to water vapour
200 g/m2 in 24 hours
Vapour barrier factor
Equivalent air state
Sd=0.090 m
Paint thickness
Water absorption coefficient
W=0.07 kg/m2 h 0.5
Flammability
not flammable
Application of subsequent coats
after 6 hours
Shelf life in the original containers
ring the numerous possible uses and the possible interference of conditions or elements beyond our control, we assume no responsibility regarding the results which are obtained. The purchasers, of their own accord and under their own re- sponsibility, must establish the suitability of the product for the envisaged use.
WATER-BASED
MINIMUM APPLICATION
KEEP AWAY
TO BREATHE
TEMPERATURE
FROM FROST
ADVANTAGES
PACKAGING
• Highly transpiring.
• Highly water repellent.
• Optimal resistance to atmospheric
pollutants on exteriors.
• Optimal resistance to washing.
• High adhesive power on the most widely
used plasters.
• Excellent resistance to alkalis; it can also
be applied on cement supports.
• FOR ANY FURTHER INFORMATION OR ADVICE ON PARTICULAR APPLICATIONS, CONTACT OUR TECHNICAL OFFICE• IN ORDER TO CORRECTLY USE OUR PRODUCTS, REFER TO INDEX TECHNICAL SPECIFICATIONS The figures shown are average indicative figures relevant to current production and may be changed or updated by INDEX S.p.A at any time without previous warning. The advice and technical information provided, is what results from our best knowledge regarding the properties and the use of the product. Conside Restoration of damp
Waterproofing with
Concrete refurbish-
masonry using damp-
vapour permeable ce-
INTERNET: http://www.index-spa.com - E-MAIL: [email protected]
proofing renders
INDEX S.p.A.

Source: http://www.indexspa.de/indexspacom//TECNOPLAN/pdf/348.pdf