Door Contact Model CT200 Product Specifications Sheet
The detector is powered by one lithium battery that can last four years or more, depending on the amount of detector activ-ity. The detector transmits a check-in signal every eight minutes that includes its unique identification code, along with the cur-rent open/close state, tamper conditions, and battery status.
• WiseLink® technology—bidirectional, encrypted RF with
AES algorithm provides optimum signal integrity and security.
• Supervised—transmits a check-in/status signal every 8
minutes indicating open/closed state, tamper state, and bat-tery status.
• Dual tamper—provides detection for both detector
removal from the base or mounting surface.
• External input—accepts normally closed (NC), dry (no
power) circuits from standard market hardwire intrusion devices, including fast response devices.
• Four working modes—internal switch only, external input
The Door Contact Model CT200 is a battery operated, wireless
only, internal switch and external input, internal switch and external input with fast response.
door contact designed for use in RSIalarm™ security systems. The door contact is intended for use in detecting the opening
• Lithium battery—lasts at least four years (estimated).
and closing of doors, windows, or cabinet doors/drawers.
The CT200 consists of a detector, a magnet with housing, an
external input, and WiseLink® bidirectional, encrypted RF cir-
cuitry for secure two-way communication with the control
panel. A dual tamper function provides detection for both detector removal from the base or mounting surface. The detec-
tor is typically installed on the stationary surface of an opening
(door frame or window frame), while the magnet is installed on
With the door or window closed, the magnetic field forces a reed switch inside the detector to close, creating a secured con-dition. When the alarm system is armed and the door or win-dow is opened, the detector transmits an open signal. The control panel receives this signal and responds according to system configuration/programming.
The external input accepts a normally closed (NC), dry (no power) circuit from standard market hardwire intrusion or smoke/heat sensing detectors. Fast response devices can also be used. Four different working modes determine whether the internal switch, external input, or both are active.
One screw secures detector to base; two screws secure detector to mounting
Maximum 3/8 in (10 mm) gap between detector and magnet.
Transmits check-in signal every 8 min-utes
External (hardwire) input type: Normally closed (NC)
1–internal switch only2–external input only3–internal switch and external input4–internal switch and external input with fast response
Detector: 3 1/8 in. x 1 3/8 in. x 1 in. (80 mm x 35 mm x 23 mm)Magnet:
RSIalarm, Inc. 202 East Golden Lake Circle, Circle Pines, MN 55014 Toll Free: (877) 206-5800 Tel: (763) 784-0200 Fax: (763) 784-0999 / www.rsialarm.com Copyright 2005 RSIalarm, Inc. Specifications subject to change without notice. WiseLink and Visioguard are registered trademarks of RSI.
IRT, Limburgstr. 16 a, 81539 München Sehr geehrte/r Entwöhnungswillige/r, wir freuen uns, dass Sie sich entschieden haben, an unserer telefonischen Tabakentwöhnung teilzunehmen und somit den Weg in die Rauchfreiheit mit uns zusammen gehen. Wie bereits angekündigt, senden wir Ihnen hiermit ein paar Fragebögen zu, um das weitere Vorgehen individuell auf Ihre Voraussetzungen und Bed�
New York-Presbyterian Pending approval by Subcommittee of Critical Care Therapeutics The University Hospitals of Columbia and Cornell Pending approval by Subcommittee of Formulary & Therapeutics Committee LAST UPDATED 5/5/10 GENERALIZED CONVULSIVE STATUS EPILEPTICUS TREATMENT ALGORITHM IN ADULTS There exists a lack of prospective controlled trials regarding the appropriate
Door Contact Model CT200
One screw secures detector to base; two screws secure detector to mounting
Maximum 3/8 in (10 mm) gap between detector and magnet.